The sounding begins with two moving satellites
From a satellite in low Earth orbit, a more distant navigation satellite can appear to rise or set behind Earth’s horizon. During that encounter, its radio signal passes through successively different parts of the atmosphere before reaching the receiver. The atmosphere delays the signal and bends its path. Radio occultation turns this changing geometry into a sounding: the receiver records phase and amplitude as the ray’s closest approach to Earth changes. No instrument has to descend physically through the layers being studied.
Sources: ro-method
First isolate the atmospheric contribution
The measured phase change also contains the effects of satellite motion and transmitter and receiver clocks. Those contributions must be accounted for before the excess atmospheric signal is interpreted. NASA JPL’s description follows this chain from phase measurements to atmospheric Doppler shift and then to bending. The crucial distinction is that bending is inferred from a precisely tracked radio link, rather than photographed directly. Accurate orbit and clock information are therefore part of the measurement system, even though the finished product may look like a simple atmospheric curve.
Sources: ro-jpl
Bending becomes refractivity through an inversion
Refractivity describes how the medium alters radio propagation. A standard retrieval converts bending angles into a refractivity profile using an inversion that assumes approximate local spherical symmetry. That means the atmosphere is treated as layered around Earth in the neighborhood of the sounding. The result assigns vertical structure to a signal that has traveled along an extended path. JPL notes that vertical and along-path resolution differ markedly. A finely spaced height grid should therefore not be mistaken for an equally narrow horizontal column of independently measured air.
Sources: ro-jpl
Dry temperature is a defined approximation
When water vapor contributes little to refractivity, the retrieved quantity is closely related to air density. Pressure can then be inferred using hydrostatic equilibrium, and temperature follows from the gas law. The ROM SAF climate-record study describes these as dry pressure and dry temperature. “Dry” identifies the retrieval assumption; it is not a humidity measurement announcing that the air contains no water. The approximation works well in sufficiently dry parts of the upper atmosphere and becomes less suitable where moisture contributes appreciably to the radio signal.
Sources: ro-retrieval
Moist air introduces more than one possible answer
Lower in the atmosphere, pressure, temperature and water vapor all influence refractivity. The same refractivity value cannot uniquely determine all of them without additional information. In the ROM SAF processing described in the study, a one-dimensional variational retrieval combines the observations with collocated short-range forecast information to estimate physical temperature and humidity. These products consequently contain both observational and background-model information. Keeping the retrieval level visible explains why a refractivity profile and a humidity profile from the same occultation are related products with different assumptions.
Sources: ro-retrieval
Horizon antennas make it a different observing geometry
Sentinel-6’s mission documentation provides a concrete hardware example: one GNSS-RO antenna supports orbit determination, while two others face the Earth’s limb to acquire rising and setting navigation signals. The signals can pass through thick clouds, extending the opportunities for atmospheric soundings. This atmospheric experiment is independent of the spacecraft’s sea-level altimeter. Sharing a satellite therefore does not mean sharing a measurement: one instrument analyzes a navigation link grazing the atmosphere, while another observes the ocean with its own radar system and processing chain.
Sources: ro-sentinel