The network listens to an electromagnetic signal

Lightning produces radio pulses as well as visible light. A ground-based network can detect those emissions without photographing the bright channel. The Met Office explains that very-low-frequency pulses, often called sferics, can travel long distances through the region bounded by Earth’s surface and the ionosphere. Their arrival at an antenna is evidence of a received radio signal. Establishing where that signal originated requires a network, because one detection by itself does not provide a unique geographic location for its source.

Sources: lightning-metoffice

Small timing differences encode different path lengths

The same pulse reaches separated receivers at slightly different times. Those arrival-time differences constrain the differences in distance traveled from the source. Multiple station pairs narrow the possible origin to a location consistent with their timing measurements, a process called multilateration. The receivers are not measuring the delay between a visible flash and audible thunder. They compare electromagnetic arrivals across the network. This is why a lightning map depends on geographically distributed sensors even if a single sensor can hear a distant event.

Sources: lightning-metoffice

The clock is part of the measuring instrument

The SAETTA study describes a local VHF lightning-mapping array with receivers timed by GPS. Its three-dimensional solution estimates four unknowns: the source’s three spatial coordinates and its emission time. Although four stations supply the basic number of constraints, that study’s processing required detections at six or more stations to provide redundancy for checking the fit. A timestamp error can resemble a propagation-time difference, so timing quality affects the reconstructed position. The extra observations help test whether one candidate source is consistent with the detections, rather than merely producing a mathematically possible point.

Sources: lightning-saetta

One flash can contain many detected events

A cloud-to-ground flash can include several return strokes, and strokes within that flash can reach different ground points. In-cloud flashes can produce multiple electrical pulses along their extent. Vaisala’s terminology guide distinguishes those events from the whole flash. Consequently, a map that plots strokes or pulses can show several marks for one visible flash. A count labeled “events” is not automatically a count of independent flashes or ground strike points. The unit being counted is part of the scientific result, not just a display preference.

Sources: lightning-terms

A mapping array can add the height dimension

NASA’s instrument catalog describes Lightning Mapping Arrays as networks of very-high-frequency antennas, GPS receivers and processing systems that recover lightning’s timing, location and structure. The result can include vertical as well as horizontal positions. This makes an array useful for investigating how electrical activity occupies a storm’s volume, rather than only placing symbols on a ground map. The catalog distinguishes horizontal from vertical spatial resolution. The height dimension therefore has its own stated resolving scale, which need not match the map view.

Sources: lightning-nasa

The points are a sample of the discharge

In the SAETTA configuration described by its authors, each receiver retained the strongest event above its detection threshold within a short sampling window. During high activity, emissions from different flashes could compete for that selection. Station geometry also affected location quality. A reconstructed point cloud therefore reflects which radio sources were detected and successfully located; it is not an uninterrupted photograph of every channel segment. Sparse points can arise from the observing process as well as from the electrical structure being studied.

Sources: lightning-saetta