A tide gauge starts with a local reference
A tide gauge records the height of nearby water relative to a defined reference, or datum. Its sensor can use different technologies, including acoustic or microwave measurements; the defining feature is the reference relationship rather than a particular mechanism. Repeated observations produce a record of the water's rise and fall at that station. That makes a gauge valuable for understanding a particular coast, but one station is not a direct measurement of the average ocean everywhere. Its geographical setting is part of the observation.
Sources: sea-gauge
The land is part of the result
Tide-gauge measurements are tied to benchmarks on land. If that land subsides, water can rise relative to the station even without an equally large rise in the ocean measured independently of the land. Uplift can have the reverse effect. NOAA therefore distinguishes local relative sea level from a global average. The practical question is not which number is more real. It is whether the analysis concerns water relative to a particular shoreline or changes in the ocean within a broader reference system.
Sources: sea-relative
A satellite needs two distances
A radar altimeter measures the round-trip travel time of a pulse between the spacecraft and the sea. That gives a range, but range alone does not give sea-surface height: the satellite's position must also be known precisely. NASA describes laser tracking, Doppler measurements and satellite navigation as complementary tools for orbit determination. The engineering challenge is to combine the range with a reliable orbital position. Motion of the spacecraft cannot simply be mistaken for motion of the water beneath it.
Sources: sea-altimetry
Atmospheric corrections and cross-checks matter
Water vapor affects the travel time of the radar signal, so satellite measurements need corrections for the atmosphere between the instrument and the sea. Calibration sites and tide-gauge comparisons provide additional checks. Satellites also extend observations across ocean areas poorly represented by coastal stations. These capabilities make the two observing systems complementary: one offers repeated local records, while the other connects measurements over large ocean regions. Agreement is tested after accounting for their different references and sampling, rather than by expecting every raw number to match.
Sources: sea-altimetry
Match the averaging period before the trend
A water-level record includes tides, seasonal changes and longer variations associated with ocean circulation and climate patterns. A short interval can therefore tell a different story from a multidecadal record at the same place. NOAA's explanation of relative trends uses monthly means derived from station observations and emphasizes accounting for recurring variations. For a fair comparison, identify the location, reference and years behind each rate. A local measurement and a global average over different periods are not a controlled test of instrument accuracy.
Sources: sea-relative
A historical rate is not a forecast
Even a well-measured historical trend is a description of the selected record. NOAA cautions that historical observations alone do not represent future risk, and explains why a single straight-line fit can conceal changes in the rate over time. This matters when a chart is carried into a planning discussion: extending its line adds an assumption about the future. The defensible reading keeps the measured history, the chosen trend calculation and any projection separate, while preserving the reference and time period attached to each.
Sources: sea-trends