The floor changes its angle to the apparent force
A passenger on a curving train feels a sideways tendency because the vehicle is continually changing direction. Tilting the body inward rotates the floor and seats relative to the combination of gravity and the apparent outward acceleration. More of that combined effect acts toward the floor, and less acts across it. Alstom used the analogy of a leaning motorcyclist in its 2002 explanation of Pendolino. The physical point is the changed orientation of the occupied body. Tilting does not remove the need for the wheels and track to provide the force that turns the train.
Sources: tilt-alstom
A small tilt can use the suspension
An inward lean need not require a large angular movement. Hitachi’s 2005 description of the N700 prototype shows air-suspension pressurization raising the outer side of the carbody to produce a one-degree inward tilt. The deliberate height difference is used while rounding a curve. It gives the pneumatic suspension an additional controlled function beyond supporting passenger load. The example also shows why a visible body angle is a poor way to judge the sophistication of a system: a small movement can demand precise coordination.
Sources: tilt-hitachi
The movement must start before it is needed
The same N700 development account identifies response time as a problem. A pneumatic system that waits until the required movement is already obvious can arrive too late at high train speed. Hitachi describes solving this through precise position and speed information from the new automatic train control system, carried over the train’s control and communication network. This coordinates body movement with the approaching curve. The important engineering variable is therefore the tilt history along the route, including entry and exit, rather than just the maximum angle reached.
Sources: tilt-hitachi
A curve can also be a position reference
RTRI’s 2020 research describes a different way to locate a tilting train. A gyroscope measures yaw rate, the speed at which the vehicle changes heading. Combining that measurement with train speed gives an estimate of track curvature. The system compares the resulting pattern with previously recorded route data to identify position. In its reported running test, RTRI obtained errors within approximately two metres. That is a result for the tested method, not a universal positioning guarantee. The useful idea is that a sequence of bends becomes a recognizable spatial signature for timing the tilt command.
Sources: tilt-position
The path to the angle affects comfort
Reaching the intended angle is only part of the passenger’s experience. The body also has a tilt velocity and a tilt acceleration: how quickly it rolls, and how quickly that rolling rate changes. RTRI’s 2023 research added tilt-velocity feedback to a controller already considering angle and acceleration. Its running tests reported better suppression of low-frequency lateral motion and a lower motion-sickness evaluation index than the compared controllers. The work also examined yawing on straight track. These findings explain why tilt design is a motion-control problem across a journey, with several kinds of movement to manage.
Sources: tilt-control