A pressure difference supplies the movement
In a central vacuum system, air is removed from the waste tank so its pressure is lower than the pressure around the toilet bowl. When the discharge path opens, that difference drives air and bowl contents toward the tank. Evac’s 2000 system uses an ejector to evacuate air from the tank, while a separate rinse washes the bowl. The waste moves through a pipe to onboard storage. Creating the pressure difference and admitting the contents are coordinated parts of a flush, performed by different components.
Sources: toilet-central
A local chamber can do the vacuum work
The whole storage tank need not be under vacuum. Evac Compact first creates a vacuum in a small intermediate tank. After the bowl is rinsed, its contents enter that chamber; pressure is then increased to move them onward to the waste-water tank. Both transfers use the intermediate space at different pressures. Evac says this removes the need for a vacuum-proof main waste tank. This separates pressure changes beside the toilet from storing waste accumulated during the journey.
Sources: toilet-compact
Water use and transport energy are separate
A vacuum flush still uses water, but the water mainly rinses the bowl while the pressure-driven airflow performs the transport. Evac Compact lists roughly 0.4–0.5 litres of water per flush, alongside compressed-air consumption. These product figures are not universal train-toilet specifications. The separation has practical consequences for vehicle design: reducing rinse water reduces demand on the fresh-water store and the volume subsequently entering waste storage, but the train must still provide the pneumatic and electrical services that operate the system. Low water consumption does not mean an energy-free flush.
Sources: toilet-compact
The evacuated air has its own route
In the Evac 2000 central arrangement, the vacuum panel moves air out of the waste tank and sends it through an odour filter before discharge outside. Waste and extracted air therefore have different destinations. Multiple toilets can share the central tank, and the manufacturer offers both continuously maintained vacuum and vacuum-on-demand configurations. The panel therefore serves several toilets, rather than just one bowl. Tank emptying then removes the collected contents from all connected units, completing a storage-and-removal process beyond the passenger’s brief flush.
Sources: toilet-central
The tank belongs to the vehicle layout
Storage has to fit around the train’s other equipment and its operating environment. Trainvac lists fresh- and waste-water tanks in stainless steel or polyethylene, with underfloor arrangements and combined tank racks behind toilet modules. Its options include insulation and heating, while roof mounting is identified for fresh-water tanks. These choices connect plumbing to packaging and climate protection. A tank exposed below a vehicle has different surroundings from one enclosed beside a cabin. The pipe route, tank location and thermal protection must therefore be considered together.
Sources: toilet-tanks
The controller coordinates more than a button
The flush button is one input to a larger control system. Evac describes controls that process user commands, system parameters and status information, together with level sensors, displays and communication over train-wide buses. These components let the train distinguish a requested flush from the condition of the water and waste system serving it. A level indication answers a storage question; a controller manages the sequence; a display communicates status. Thinking of these as separate functions makes it easier to understand why a working button alone cannot establish that the complete sanitary system is available.
Sources: toilet-controls