A timed reply provides a distance constraint
In a two-way acoustic navigation exchange, a vehicle or ship sends a ping and a transponder replies. The elapsed travel time constrains distance once sound speed and the reply timing are accounted for. WHOI’s educational example uses a sound speed of 1,500 meters per second and distinguishes transponders by their reply frequencies. That speed belongs to the simplified example. The exchange measures a path between identifiable instruments, so it can locate a vehicle relative to known references rather than merely finding a reflecting seabed.
Sources: nav-whoi
USBL adds direction with a compact array
An ultra-short-baseline system places several acoustic receiving elements close together in one transceiver head, commonly mounted below a ship. Sonardyne describes a typical head with three or more elements separated by ten centimeters or less. The received signals provide an arrival direction, while the interrogation-and-reply timing provides range. Combining the two places the target relative to the transceiver. The short baseline describes the spacing within that measuring array, not a requirement that the underwater vehicle remain only a short distance from the vessel.
Sources: nav-usbl
LBL spreads the references across the seabed
Long-baseline positioning instead uses transponders at known positions, usually widely separated around a work area. Distances from the target to those references constrain its location through their intersecting geometry. Extra ranges provide redundancy for recognizing inconsistent observations. Sound speed remains part of every conversion from time to distance, and varies with temperature, salinity and pressure. Sonardyne’s description therefore treats an established seabed array and environmental sound-speed information as ingredients of the position solution. The reference network is physical equipment whose coordinates must themselves be known.
Sources: nav-lbl
A local fix is not yet a geographic coordinate
The position relative to a transceiver or seabed array must be tied to a geographic reference before it becomes latitude and longitude on a map. That connection can include the vessel’s satellite position and measured offsets between its antenna, acoustic transceiver and the vehicle’s chosen reference point. Sonardyne distinguishes repeatability from closeness to the true position. A consistently reproduced local fix can still carry an offset in its geographic tie. Improving the acoustic range precision alone does not remove an incorrect antenna-to-transceiver relationship.
Sources: nav-lbl
An angular error grows sideways with range
The range-and-angle construction of USBL has a useful geometric consequence. Imagine two rays leaving the transceiver with a small angular separation: their sideways separation increases with distance. As an illustrative calculation, a one-degree angular discrepancy at a slant range of 1,000 meters corresponds to about 17 meters across the line of sight. This is geometry, not a claimed accuracy for a Sonardyne product. It explains why knowing the receiving array’s orientation matters alongside detecting a precise reply time when the target is far away.
Sources: nav-usbl
A vehicle track combines fixes and motion information
WHOI’s archived ABE vehicle description gives a concrete implementation: long-baseline navigation was augmented by Doppler velocity logging. Acoustic travel times, vehicle depth and a sound-speed profile supplied ranges and position fixes. Filters rejected incorrect ranges caused by reflections and noise, and later processing refined the track. This historical system illustrates why a smooth vehicle route need not be a sequence of equally independent acoustic fixes. Motion information can connect fixes, and processing can change their interpretation. The navigation record has its own measurement history alongside the science observations it locates.
Sources: nav-abe