What replaces the gaps?

If rails are welded into a continuous length, where does hot-weather expansion go? Restraint changes the answer. Fastenings hold the rail to sleepers. The FRA’s buckling analysis relates axial force in a constrained rail to its temperature difference from the neutral, or force-free, temperature. Above that reference, compression develops; below it, tension develops. Welding has not removed steel’s thermal response. Instead of treating the rail as a freely lengthening bar, the explanation must include force within a restrained structure. The report also cautions that real track is not perfectly constrained and that its neutral temperature can change.

Sources: CW1

Temperature needs a reference

An air-temperature headline leaves out two important details. Network Rail explains that sunlit rails can be substantially hotter than the surrounding air, and that countries choose stress-free temperatures to suit their climates. Its 2023 explanation also describes the winter consequence of choosing a higher reference: increased tensile forces in cold conditions. A warmer-weather setting is therefore part of a seasonal compromise. This is why a temperature quoted for one network should not become a worldwide danger threshold, and why a weather forecast alone cannot describe the thermal condition of a particular rail.

Sources: CW2

Geometry changes the answer

Track shape also matters. In a 2023 study, RTRI used finite-element models to examine how lateral alignment irregularities affect buckling. Increasing the size of an irregularity or shortening its wavelength tended to lower the calculated buckling temperature. Different irregularity shapes could still produce different results at the same height and wavelength. The researchers consequently investigated curvature as a more useful descriptor. These are model-based relationships for the studied track conditions, not a temperature rule that a reader can apply to an arbitrary bend visible in a photograph.

Sources: CW3

The support matters

RTRI’s 2024 research adds the supporting ballast to the picture. Its proposed risk-assessment method combines estimated lateral ballast resistance with track irregularity. Insufficient stone at the ballast shoulder and unsupported sleepers reduce the resistance available to oppose sideways movement. Train-mounted LiDAR estimates ballast shape; track-measurement data help identify unsupported sleepers. The resulting index is intended to identify relatively vulnerable locations. It does not follow that a photograph of plentiful ballast establishes safety: the method uses measured geometry and estimates of support, rather than appearance alone.

Sources: CW4

Read the claim carefully

For a useful reading exercise, take one published heat-related track report and underline every temperature. Label each as air temperature, rail temperature, reference temperature or an estimated buckling condition. Leave an unlabelled number unresolved instead of silently choosing a meaning. Then list what the report actually says about alignment and support. Ask whether its conclusion concerns an observed event, a modelled case or a proposed screening method.

Finally, keep the claim at that scale. A public explainer can help you ask better questions about the evidence; it cannot certify a track or supply maintenance instructions. Seek the operator’s specific account before interpreting a disruption as proof that welded rail either defeats heat or inevitably fails in it.